Replace Your Old Hangers with New Double Traverse Rods

Although enhancing their living rooms, individuals normally favor to set up curtain rods that can seamlessly match with all the overall decor from the residence. Nowadays, you'll find diverse styles of rods accessible. You are able to either wish to purchase easy Decorative Curtain Rods or traverse curtain rods that include a pulley method, which tends to make it easy to open and close the drapes by just pulling the wand. A few of the hardware of those rods operates by means of a side draw whereas other folks make use of center draw.

The layout from the drapes although utilizing these rods is going to be such that an S-shaped pin attaches towards the pleats in your drapes having a Curtain Hook finish that may be observed via the small hole inside the hanger. Considering that the hangers utilised are created of plastic, they are able to break or wear out very easily when exposed to sun or with all the passage of time. Nonetheless, these hangers will not be extremely costly and may be easily purchased and installed in just a few minutes time. As soon as they grow of their age, you'll be able to replace them to initiate a proper functioning of the rods and curtains.

This article discusses methods by way of which you can replace your old, worn-out hangers with new ones.

Whether you're utilizing single or double traverse rods, it really is initial essential for you to detach the panels from the drapes from the corner from the bracket to expose the traverse rod around the side which has the Curtain Hangers broken. By lifting the hooks, continue to remove the drapes in the corner of bracket.

After you happen to be completed with their removal, now detach the hooks from the hangers and set the drape in a single side to expose the hardware, rod and ring hangers. To prevent the loss of any pins, which may possibly be stuck in the seams on the pleats, fold the drapes and preserve them aside. Even so, in case you believe that your curtains want some cleaning, cautiously eliminate the hooks and in the pleats.

The following step is always to unlock the rod, which can be completed by pressing down the tab around the pulley situated on the either side of the rod. This step aids you to effortlessly slide sling hanger off the rod. Now slide the hanger more than the housing and by way of the hole provided, lift it out meticulously.

By means of the open end, get rid of the broken plastic hangers and replace them with new ones. Now match the new hangers through the end on the rod along with the slot. Just ensure that the hanger faces within the forward path.

As soon as the whole procedure is more than, reattach the drapes or curtains around the traverse rods by inserting the hook end in the s-shaped pin, which could be noticed on the backside in the pleated drapes.

Precisely the same approach might be followed with extra-long traverse rods. However, be cautiously while reattaching the drapes as the s-shaped hooks includes a sharp pointed end, which can get poked on your finger.