Replace Your Old Hangers with New Double Traverse Rods

While enhancing their living rooms, people generally prefer to set up curtain rods that may seamlessly match together with the general decor of the property. These days, you will find distinct types of rods obtainable. It is possible to either wish to purchase basic Decorative Curtain Rods or traverse curtain rods that include a pulley program, which makes it simple to open and close the drapes by just pulling the wand. A few of the hardware of those rods operates by way of a side draw whereas other individuals make use of center draw.

The layout of the drapes whilst employing these rods will probably be such that an S-shaped pin attaches towards the pleats on your drapes using a Curtain Hook finish that can be seen by means of the small hole in the hanger. Because the hangers utilised are made of plastic, they are able to break or wear out easily when exposed to sun or with all the passage of time. Nevertheless, these hangers will not be extremely pricey and can be easily purchased and installed in just several minutes time. After they grow of their age, you can replace them to initiate a correct functioning of one's rods and curtains.

This article discusses methods through which you can replace your old, worn-out hangers with new ones.

Whether you might be employing single or double traverse rods, it's very first required for you personally to detach the panels in the drapes in the corner on the bracket to expose the traverse rod around the side which has the Curtain Hangers broken. By lifting the hooks, continue to take away the drapes in the corner of bracket.

When you happen to be accomplished with their removal, now detach the hooks from the hangers and set the drape in one side to expose the hardware, rod and ring hangers. To prevent the loss of any pins, which may well be stuck in the seams of the pleats, fold the drapes and hold them aside. Even so, should you think that your curtains require some cleaning, cautiously eliminate the hooks and in the pleats.

The following step is to unlock the rod, which can be completed by pressing down the tab around the pulley situated around the either side of the rod. This step aids you to simply slide sling hanger off the rod. Now slide the hanger over the housing and via the hole provided, lift it out meticulously.

By way of the open end, eliminate the broken plastic hangers and replace them with new ones. Now fit the new hangers through the finish of the rod as well as the slot. Just ensure that the hanger faces within the forward direction.

When the complete procedure is more than, reattach the drapes or curtains on the traverse rods by inserting the hook end in the s-shaped pin, which may be observed around the backside from the pleated drapes.

The same process may be followed with extra-long traverse rods. However, be cautiously whilst reattaching the drapes because the s-shaped hooks includes a sharp pointed end, which can get poked in your finger.